COURSE DESCRIPTION:
This course provides an overview of basic electrical safety for individuals with little or limited training or familiarity with electrical hazards and is designed for any worker who may use extension cords, electric tools, etc. This course covers the topics included in OSHA 29 CFR 1910.301-399 Subpart S.

LEARNING OBJECTIVES:
Establish the conditions covered by OSHA’s 1910 Subpart S Design Safety Standards
Outline the general requirements for electrical safety standards
Understand the proper use and identification of circuits and conductors
Define the standards for electrical grounding and protection
Establish the general requirements for wiring methods and equipment
Establish the guidelines and requirements for special purpose equipment
TOPICS COVERED:
Lesson 1 Introduction to Electrical Safety
Lesson 2 Wiring Design and Protection
Lesson 3 Wiring Methods, Components, and Equipment
Lesson 4 Specific Purpose Equipment
REGULATORY REQUIREMENT:
Please see the state/regulatory requirement from the course catalog page.

SEAT TIME:
This course has been approved for 1 hour.

COURSE PRE-REQUISITE:
N/A

TESTING:
Quizzes – All quizzes must be passed with a 100% to proceed forward to the next lesson.
Final Exam- Final Exam must be passed with a 70% to pass the course. The final exam can be taken three times if necessary.

COURSE DESCRIPTION:

This course is designed to inform employees about the requirements for lockout/tagout during servicing and maintenance of machines or equipment. Also covered are the requirements of the OSHA Lockout/Tagout Standard, procedures for the application of locks and tags, and a discussion of the types of energy these procedures are designed to control.

LEARNING OBJECTIVES:

· Understand key components of the lockout/tagout standard

· Understand the purpose and elements of an energy control program

· Understand types and responsibilities of people involved with lockout/tagout

· Understand elements that must be included in energy control procedures

· Learn the training and inspection requirements

· Learn steps to safely apply energy shutdown

TOPICS COVERED:
Lockout
Tagout
Conditions for Lockout/Tagout
Purpose for Lockout/Tagout
General Requirements for Lockout/Tagout
Energy Control Application
Release for Lockout/Tagout
Energy Control Program
REGULATORY REQUIREMENT:
Please see the state/regulatory requirement from the course catalog page.

SEAT TIME:
This course has been approved for 1 hour.

COURSE PRE-REQUISITE:
N/A

TESTING:
Quizzes – All quizzes must be passed with a 100% to proceed forward to the next lesson.
Final Exam- Final Exam must be passed with a 70% to pass the course. The final exam can be taken three times if necessary.

COURSE DESCRIPTION:
This course provides an overview of basic electrical safety for individuals with little or limited training or familiarity with electrical hazards and is designed for any worker who may use extension cords, electric tools, etc. This course covers the topics included in OSHA 29 CFR 1910.301-399 Subpart S.

LEARNING OBJECTIVES:
Establish the conditions covered by OSHA’s 1910 Subpart S Design Safety Standards
Outline the general requirements for electrical safety standards
Understand the proper use and identification of circuits and conductors
Define the standards for electrical grounding and protection
Establish the general requirements for wiring methods and equipment
Establish the guidelines and requirements for special purpose equipment
TOPICS COVERED:
Lesson 1 Introduction to Electrical Safety
Lesson 2 Wiring Design and Protection
Lesson 3 Wiring Methods, Components, and Equipment
Lesson 4 Specific Purpose Equipment
REGULATORY REQUIREMENT:
Please see the state/regulatory requirement from the course catalog page.

SEAT TIME:
This course has been approved for 1 hour.

COURSE PRE-REQUISITE:
N/A

TESTING:
Quizzes – All quizzes must be passed with a 100% to proceed forward to the next lesson.
Final Exam- Final Exam must be passed with a 70% to pass the course. The final exam can be taken three times if necessary.

In this four lesson program on basic electrical fundamentals, we will be introducing and studying the general physics, that is the basic natural laws which govern the application in utilization of electricity. This material will serve as the solid foundation on which to build the more advanced concepts that are dealt with in our many other training programs.

LEARNING OBJECTIVES:

• Define Electricity
• What is Ohm’s Law
• Understand the Operation of Simple Circuits
• Resistance Calculations Power
• Understand various electrical hazards
• Describe the Fundamentals of Magnetism

TOPICS COVERED:

Lesson 1: Electron Flow and Ohms Law
Lesson 2: Circuit Elements
Lesson 3: Conductors, Insulators and Safety
Lesson 4: Fundamentals of Magnetism Properties

SEAT TIME:

This course has been approved for 2 hours.

COURSE PRE-REQUISITE:

N/A

TESTING:

Quizzes – All quizzes must be passed with a 100% to proceed forward to the next lesson.
Final Exam- Final Exam must be passed with a 70% to pass the course. The final exam can be taken three times if necessary.

]]> http://electricianceinstituteofamerica.com/wisconsin/electrical-fundamentals.html/feed 0 http://electricianceinstituteofamerica.com/wisconsin/nfpa70e.html http://electricianceinstituteofamerica.com/wisconsin/nfpa70e.html#comments Fri, 16 Sep 2011 02:02:39 +0000 admin http://electricianceinstituteofamerica.com/?p=128 Electrical power is a dangerous force that requires proper understanding in the workplace. This course defines the requirements for work practices that workers should use to avoid injury from a release of electrical energy when performing tasks involving electrical power. The specific information in this course enables the student to prevent or minimize exposure to all widely recognized electrical hazards as well as to better understand the importance of the relationship between OSHA and NFPA 70E.

Learning Objectives

• Understanding standards for electrical safety
• Understand the relationship between OSHA and NFPA 70E
• Understand ARC ratings
• Creating safe working conditions
• Understanding electrical shock hazards
• Understand transformers and circuit breakers
• Executing a lockout/tagout
• Understanding hazards of live parts
• General standards on personal protective equipment

Topics Covered

• Introduction to NFPA 70E
• Safety Related Work Practices
• General Requirements for Electrical Safety Related Work Practices
• Electrical Safety Program
• Transformer Current Ratings
• Energized Electrical Work Permits
• Lockout/ Tagout
• Working On or Near Live Parts
• Alternative Methods of Determining Arc Flash FR Clothing and PPE
• General NFPA 70E standards pertaining to Personal and other Protective Equipment

Approved Course Provider Number: 3625

]]> http://electricianceinstituteofamerica.com/wisconsin/nfpa70e.html/feed 0